Product ID:ACTIVATOR BA-83
MSDS Date:08/16/1990
FSC:8040
NIIN:00F029986
Kit Part:Y
MSDS Number: BRXPM

BACON INDUSTRIES INC

192 PLEASANT STREET
WATERTOWN, MA 02172-2321
US

Emergency Phone: 617-926-2550 OR 714-863-1499

Info Phone: 508-668-6753 OR 714-559-1134

Cage: 99098

BACON INDUSTRIES, INC.

WATERTOWN, MA 02172 US

Telephone: 617-926-2550

Cage: 99098

POLYAMIDE OF C18 FATTY ACID PRIMERS & TETA; POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 77%

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 9%

SILICON DIOXIDE, CELITE 322

CAS: 7631-86-9

RTECS: VV3100000

Fraction By Weight: 14%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM

LD50 LC50 Mixture:ORAL LD50 (RAT): >8000 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: SLIGHTLY TOXIC. INHALATION:
RESPIRATORY IRRITATION. SKIN: SEVERE INJURY. MAY CAUSE ALLERGIC
REACTION. EYES: SEVERE INJURY. LONG-TERM CONTACT W/SKIN MAY CAUSE
SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: REDDENING & SWELLING.
Medical Cond Aggravated by Exposure:ECZEMA, PSORIASIS & DERMATITIS.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. IF CONTACT W/HOT
PRODUCT OCCURS FLUSH W/COOL WATER FOR AT LEAST 15 MINS. SKIN: WIPE
OFF EXCESS & FLUSH W/WATER FOR 15 MINS WHILE REMOVING CONTAMINATED
CLOTHI NG/SHOES. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T
INDUCE VOMITING. IF CONSCIOUS, GIVE PLENTY OF WATER OR MILK. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIUOS PERSON. OBTAIN MED ATTN.

Flash Point Method:COC
Flash Point:>560F
Extinguishing Media:WATER SPRAY, CO2, OR DRY CHEMICAL FOR SMALL FIRES.
USE ALCOHOL TYPE FOAM FOR LARGE FIRES.
Fire Fighting Procedures:WEAR POSITIVE SELF CONTAINED BREATHING
APPARATUS & FULL PROTECTIVE CLOTHING.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. WEAR PROTECTIVE
EQUIP. LARGE SPILLS: DIKE/PUMP INTO APPROPRIATE CONTAINERS. SMALL
SPILLS: SOAK UP IN AN INERT ABSORBENT. REMOVE RESIDUAL USING DILUTE
(5%) ACETIC ACID. PLAC E WASTE IN AN APPROVED METAL CONTAINER &
SEAL.

Handling and Storage Precautions:STORE AT 85F OR BELOW. DON'T ALLOW
CONTACT W/COPPER, COPPER ALLOY, ALUMINUM OR ALUMINUM ALLOY
MATERIALS. BULK STORAGE SHOULD BE UNDER NITROGEN BLANKET
Other Precautions:AVOID EYE & SKIN CONTACT. DON'T WEAR CONTACT LENSES
WHILE USING OR IN THE VICINITY IN WHICH THIS PRODUCT IS BEING USED.
KEEP CONTAINERS CLOSED TIGHTLY WHEN NOT IN USE.

Respiratory Protection:IF TLV'S ARE EXCEEDED USE A NIOSH ORGANIC FUME
RESPIRATOR. USE A NIOSH APPROVED PARTICULATE RESPIRATOR WHEN CURING
MATERIAL IS MACHINED, CUT, SANDED.
Ventilation:LOCAL. MECHANICAL MAY BE ACCEPTABLE WHEN SMALL AMOUNTS ARE
USED AT ROOM TEMPERATURE. VENT CURING OVEN OUTDOORS.
Protective Gloves:IMPERVIOUS LATEX OR RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING. EYE WASH
FACILITY & SAFETY SHOWER.
Work Hygienic Practices:REMOE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. SEVERELY CONTAMINATED CLOTHING SHOULD BE DISCARDED.
Supplemental Safety and Health

Boiling Pt:B.P. Text:531.3F
Vapor Pres:0
Spec Gravity:1.05
Solubility in Water:SLIGHT
Appearance and Odor:AMBER VISCOUS PASTE W/AMMONICAL ODOR.
Percent Volatiles by Volume: 0

Stability Indicator/Materials to Avoid:YES
COPPER, ALUMINUM, STRONG OXIDIZING AGENTS, ACIDS, HALOGENATED ORGANIC
COMPOUNDS, ALDEHYDES, KETONES, & ACRYLATES.
Stability Condition to Avoid:TEMPS >85F
Hazardous Decomposition Products:NITROGEN OXIDES, CO2, CO, ALDEHYDES &
OTHER HAZARDOUS ORGANICS.
Conditions to Avoid Polymerization:MAY OCCUR WHEN MIXED W/AN EPOXY
RESIN AT ELEVATED TEMPERATURE (>150F) ESPECIALLY IN QUANTITIES
GREATER THAN 1 LB.

Waste Disposal Methods:INCINERATE AT A U.S. EPA PERMITTED WASTE
FACILITY &/OR BURIAL IN AN EPA SECURED LANDFILL. OBSERVE ALL
APPLICABLE FEDERAL, STATE & LOCAL REGS. DON'T CONTAMINATE LAKES,
STREAMS, PONDS OR UNDERGROUND WAT ER SUPPLIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.